600mm 1000lm Portable Work Light Battery Powered With Micro USB Connector

Product Features : Integraed high brightness led light source , work light 12W , with 40pcs 0.2W 2835 LED chips ; Work light 12W m with 60pcs 0.2W 2835LED chips . •Fix method : Several high strong magnet at the bottom of lamp , can adhere to the metal equipement . at the same time , there are two hooks , which slide along with the body , which can turn around in 360 degree . when no use of it , can be set to hook box and not effect to other functions . .•Beam angle :emergency light beam angle up to 300°.•Using high power Li-Po battery .•High efficiency curcuit, long working time .•Integrated safety inspection curcuit , charging safe, quick.•With Micro charging connector , suitable to all 5V charge adaptor. Convinient for charge . Working Environment :-20℃～65℃.•Charge phone , used as a battery bank . Usage : Working light mode : shot press switch working light 100%, another shot press , 50% light output . third shot press , 10% , the forth light off . Cycle by turn . flash / SOS mode long press more than 1s , flash; another 1S long press ,SOS for helping signal.Fix lamp :The products can be fixed through the strong magani, anothec adhere to the metal things or hang to things through hook. All upto the demand . 2Inserting the Micro USB to the Micro USBinput on light ,then insert the USB plug to the outside DC5V power source .When the indicator lamp is red , means in charging ,when it turn to green , means ,finish charging .Charging time : if charging with the DV5V/2A adaptor, (different adaptor ,the charging time will be different )6600mAh finish charging need 4-5hrs .10000mAh finish charging need 6-7hrs . Application : the work lighting on vihicle maintenance and repair, Traffic safety , lighting when power cut; outdoor lighting at night , machine , equipment maintenance and repair ect.